After little activity over the last two weeks, I could not get my green 1600 Deluxe to fire up. More of that story in a future blog. In the process, the ignition switch became very loose so I thought I would clean it up and tighten the assembly. The photos show the switch and how it fits into the steering wheel console.

To get to this stage, just undo the LH bolt securing the steering wheel to the dash as the plastic lug holds the console in place. Loosen the RH nut a little as this gives a little more movement. There are two screws on the side of the console holding it together & they need to be removed.
Having it out, I thought I would clean it a little & put a few squirts of WD40 around the key & switching mechanism. So I could assemble it correctly, I marked the two sections with black marker pen as in the photo.
Little did I know that after a few squirts of the magic stuff, both marks rubbed off & I was then confused how it went back together correctly. The metal switch had numbers for the wiring but the plastic bit had nothing. Great! If this didn't go back together correctly, all hell would break loose in the wiring department.
I consulted all my manuals, parts books & nothing helped. I used the wiring diagram to list all the wires & their locations but not a lot of help. What next?
Having a second Capri can be very useful at times so I should be able to look at it & that will tell me easily. I undid the plastic bits & surprise, surprise!!. The switch was a completely different unit (RH photo). See the photos. So between 1970 & 1972, that was a change that was made.

Back to my initial problem - how does this go back together correctly?
Looking at both sections, I noticed there is a small ridge on both sections so I figured if this was aligned it would be correct. I looked carefully at the placement of all the prongs & connectors & it looked pretty right. In fact, when you look carefully & try the different positions, it will not align properly so really there is only one correct way. It is just that no one tells you this or prints it in any manuals (that I could find!).
After pushing it securely & reconnecting the battery leads, there was no smoke & everything worked OK, except the car still did not start. That is another story.
So the moral of this blog is - either mark better or take good pictures of how things go together & you will save heaps of time.
I have been meaning for some time to buy a spare clutch cable. These seem to break at the most inopportune time so having one in the car can sometimes be handy.
I recently purchased this NOS Quinton Hazell cable from the UK for $33.50 including postage, which I considered to be a pretty good price. It was delivered to my door in just over a week. Much cheaper than buying it locally and also illustrates the variety of NOS available in the UK.
As this blog approaches 5,000 views, I would really like to hear from some of you who live in other countries but are keen Capri followers.
The blog has had visits from viewers who live in the USA, Australia, France, United Kingdom, Thailand, Russia, Venezuela, South Africa, Germany & Slovenia.
I didn't realise that there are people in these countries who still are interested in the old Capris so let me know your story.
Regards
Ian
An update on the sale of the white Capri V6 that I wrote about previously.
After the first week on EBay, it didn't reach the reserve & was passed in for $30,100.
After week two, it was passed in at $28,600.
Soon after it was red-advertised in week three, it was withdrawn from sale.
There are some unconfirmed rumours that it sold for about $35,000.
A very good result if that is correct. I guess it confirms that buyers will still pay top money for quality restorations.
A further update!!
This car is back for sale on EBay. The seller states this is because the buyer did not produce the cash. It will be interesting to see what it sells for this time.
Last Saturday, the Capri Club members were very fortunate to
be able to visit the shed of our Vice- President, John. John would have to be one of the most knowledgeable
people in Australia on Capris and his experience with rebuilding Capri V6
engines is legendary.
The term, his shed,
is a bit misleading as John’s shed consists of a complex of many sheds. He
resides on the outskirts of Brisbane on acreage so has plenty of room to house
his cars & machinery. Every part of the complex is filled with engineering equipment
& tools, plus the odd very valuable Capri.
For our visit he asked us, in advance, what we would like to
see. So, three topics were settled on.
Firstly, how the engine dynamometer works. John had spent
hours setting up a V6 engine ready to show us but the night before a simple
seal went and he was unable to do the demo. However, we were still able to see
how everything was set up and what was recorded during the test.
Next we were shown how a crankshaft was balanced, as well as
all the engine components i.e. pistons, conrods etc. His machine is able to
indicate where weight should be added or removed. All very time consuming but
essential in building high performance engines.
Finally, he gave a demo on measuring airflow. Various head
were used to indicate the difference in how air circulates within the engine
and what can be done to maximise this.
A very interesting afternoon and this is just John’s hobby
not his real day job. He has a vast knowledge of Capris and is very willing to
share this with other Capri enthusiasts. Thank you, John.
Here are some pictures from the day and from a car meet later
on in the afternoon held at the Woolworth’s car park at Morayfield.







